• Powder: 2 Scoops 18gm
• Water: 1 Measure 36ml
• Start of mix: 0 Sec
• End of the mix: 40 Sec
• Load of tray: 60 Sec
• Tray in mouth: 1.10 Mint
• Final Set: 2.15 Mints-Total

Colour Changing:

• Powder: Yellow
• Start of mix: Pink
• End of the mix: Light Pink
• Load of tray: Yellow
• Tray in mouth: Yellow
• Final Set: Yellow

• 1 x 450gm Powder

Mixing Process:

• Start by placing the required amount of water in a clean mixing bowl.
• Gradually add the powder to the water while stirring continuously.
• Mix until the powder is fully incorporated and a smooth, homogenous mixture is achieved.

Color Indicators:

• The powder starts as light yellow.
• Once mixing begins, it transitions to pink.
• At the end of the mixing process, it becomes light pink.
• The loaded tray should exhibit a yellow color.

Timing:

• Start timing the mixing process from the moment powder and water are combined.
• The entire mixing process should take approximately 40 seconds.
• Load the tray within 60 seconds of the start of mixing.
• Insert the loaded tray into the patient's mouth within 1 minute and 10 seconds.
• The final set should occur within 2 minutes and 15 seconds from the start of mixing.

Setting Environment:

• Note that heat enhances the setting process, while cold may retard it. Ensure a stable temperature environment during the procedure.

Application:

• Use Prime Chrome Alginate for various dental applications such as removable prostheses, study models, and antagonist creation.

Storage:

• Store the alginate material in a cool, dry place, away from direct sunlight and moisture.