• Acid Concentration: 37% phosphoric acid
• Consistency: Liquid
• Stability: Does not dry or thicken over time
• Application Method: Applied with a small brush on enamel and dentin surfaces
• Application Time: 15 seconds, with the option to repeat for an additional 10 seconds if necessary
• Storage: Cool and dark place, away from direct flame exposure

• 1 x 15 ml Bottle

Directions for Use: Prime Dental Etching Liquid

Preparation:

• Ensure the dental work area is well-lit and properly equipped.
• Shake the 15ml bottle of Prime Dental Etching Liquid well before use.

Application:

• Dispense a small amount of the etching liquid onto a suitable surface.
• Using a small brush, apply Prime Dental Etching Liquid evenly on the enamel and dentin surfaces to be etched.

Timing:

• Allow the material to remain in place for 15 seconds for the initial application.

Visual Inspection:

• Thoroughly inspect the treated area for the desired visual indication. A chalky white appearance may signify successful etching.

Repeat if Necessary:

• If the desired visual indication is not achieved after the initial 15 seconds, repeat the application for an additional 10 seconds.

Rinsing:

• Rinse the treated area thoroughly with water to remove the etching liquid.

Drying:

• Dry the treated area with oil-free air. Be cautious not to over-dry, as this may result in a chalky white appearance.

Storage:

• Recap the bottle tightly after use.
• Store Prime Dental Etching Liquid in a cool and dark place, away from direct flame exposure.