Soft Putty

• Mixing Time: 30secs
• Load in Tray: 1 mins 10s
• Insertion in Mouth: 1mins 20s
• Setting Time: 2mins 45s

Light Body

• Mixing Time: 40secs
• Load in Tray: 1 mins 20s
• Insertion in Mouth: 1mins 30s
• Setting Time: 3mins

Prime Dental Ad-Sil Soft Putty + Light Body tubes:

• 1 x 400g Base
• 1 x 400g Catalyst
• 1 x 25ml (35g) Base tube
• 1 x 25ml (35g) Catalyst tube

Prime Dental Ad-Sil Soft Putty:

• 1 x 400 Base
• 1 x 400 Catalyst
• 2 x Spoone 

Prime Dental Ad-Sil Light Body Tubes 2 x 25ml:

• 1 x 25ml (35g) Base
• 1 x 25ml (35g) Catalyst

Prime Dental Ad-Sil Light Body Tubes Cartridge 2 x 50ml:

• 2 x 50ml Cartridges

Preparation:

• Ensure proper preparation of the dental surface, including clearing excess blood, saliva, and moisture.

Mixing:

• For both Soft Putty and Light Body components, mix equal quantities of base and catalyst until a uniform color is achieved.

Application:

• Dispense the Soft Putty around the margin of the preparation using a rigid tray, leaving adequate space for impression material.
• Dispense the Light Body material with a syringe around the margin for precise detail capture.

Impression Taking:

• Seat the tray in the patient's mouth, allowing the material to set according to the specified times.

Removal and Handling:

• Carefully remove the set impression, avoiding undue stress that may distort the impression.

Cleaning and Storage:

• Rinse the impression under running water if required, and store in a cool, dry place away from direct sunlight.

Precautions:

• Avoid use in patients with known silicone allergies.
• Handle silicone material with care, avoiding contact with incompatible substances.
• Ensure proper tray adhesive application and drying before usage.

Disposal:

• Dispose of according to prevailing regulations.