• Type: Light-cured, universal bonding agent for dental restorations.
• Bonding Mechanism: Utilizes advanced adhesive technology for a strong and durable bond.
• Curing: Requires light curing
• Film Thickness: Ultra-thin layer for precise application and seamless restoration integration.

• 1 x 5ml Bottle 

Cavity Preparation:

• Carefully prepare the cavity, removing all decayed or damaged tooth structures using appropriate dental instruments. Ensure that the cavity walls are clean and free of debris.

Isolation:

• Create a dry and isolated field using a rubber dam or other isolation techniques to protect the tooth from saliva and maintain a clean working environment.

Protective Liner Application:

• Apply a protective liner, such as a calcium hydroxide material, to areas where the remaining dentin is thin. Avoid using materials containing eugenol.

Bonding Agent Preparation:

• Dispense an appropriate amount of the bonding agent onto a mixing well.

Application:

• Use an applicator brush to apply the material evenly on the entire inner surface of the cavity.
• Ensure that the dispensed material is used by a single patient to prevent cross-contamination.

Setting Time:

• Allow the applied dental filling material to sit undisturbed for approximately 10 seconds.

Drying:

• Use a gentle stream of air to dry the material for about 5 seconds.

Light-Curing:

• To protect both the operator and the patient, wear appropriate protective eyewear, and shield the patient's eyes from direct exposure to the curing light.
• Using a dental light-curing unit, initiate the light-curing process for 10-20 seconds based on the intensity and wavelength of the LED curing light.