Grades :

• Soft
• Medium
• Hard

• 1 x Pack of 10 sticks

Inlay wax may be softened over a flame or in water at 54°-60°C to enable their flow in the liquid state and adaptation to the prepared tooth or die.

FABRICATION OF WAX PATTERN (DIRECT TECHNIQUE)

• Dry heat (flame) is used.
• Wax is softened over the flame, should be twirled until it becomes shiny, then kneaded.
• Finally shaped into the cavity.
• Then pressure should be applied either by the finger of the dentist or patient biting on the wax.

FABRICATION OF WAX PATTERN (INDIRECT TECHNIQUE)

• Lubricate the die with a die lubricant.
• Melted wax is carried into the die either with a wax spatula or with a painting brush.
• Prepared cavity is overfilled and carved to the proper contour.
• A silk cloth may be used for final polishing of the pattern.