Composition :

Base Paste : Zinc Oxide, Vegetable Oil.

Catalyst Paste : Hydrogenated Resin, Ethoxy BenzoicAcid, OctanoicAcid, AceticAcid

Working time : 2:00-2:30 minutes at a room temperature of 25°C.

Self-curing time : 6-10 minutes at room temperature of 25°C.

• 1 x 15gm Cartridge (Base & Catalyst)
• 1 x Mixing Pad
• 1 x Cement Spatula
• 1 x Instruction Manual

• Manual-Mix, Extrude equal lengths of Base and catalyst onto the mixing pad provided.
• The length to be extruded will depend on the size and type of restoration to be cemented.
• Replace cap tightly on cartridge after use.
• Thoroughly mix the pastes for approximately 30-45 seconds.

Preparation and application

• Dry the prepared teeth and the surface of the restoration.
• Prior to cementation, a protective varnish (e.g., Shield Activ Desensitizer) may be applied to the clean and dry dentin surfaces. It should be brushed gently into the dentin for 10 seconds using a suitable instrument (brush, applicator brush).
• Carefully disperse excess to a thin layer with blown air/dry with an air syringe.
• Do not over dry the dentin (carefully follow the instructions supplied with Shield Activ Desensitizer).
• Apply a thin layer of the mixed cement to the internal surtaces of the temporary restoration.
• Subsequently, seat the provisional restoration with light pressure.
• Excess cement can be removed after 3 minutes using a scaler or other appropriate instruments.
• Also use a scaler and dental floss to remove any excess cement from the interproximal areas.
• The dispensed material shall not be placed back in container and the dose once applied and used shall not reused.