COMPOSITION

• Store at temperature of 4-25°C (39.2-77.0°F)
• Mixing time: 20-30 seconds
• Setting time: 3 minutes from the start of mixing

CONTRAINDICATIONS

In rare cases the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of the product and refer to a physician.

CAUTIONS

In case of contact with eyes, flush immediately with water and seek medical attention.

• 1 x 20ml Base
• 1 x 20ml Accelerator

Step 1. Squeeze equal lengths of Base and Accelerator pastes onto the mixing pad.

Step 2. Mix thoroughly for 20-30 seconds.

Step 3. Insert paste into (temporary) crown or bridge and seat onto the prepared dry tooth.

Step 4. Allow to set (3 minutes from start of mixing) and trim excess.

NOTES

• 1. Setting time can be adjusted by using more or less Base (More Base-faster set ; less Base-slower set). Do not go outside Base / Accelerator ratio range 3 : 2 to 2 : 3).
• 2. If material sticks to tooth or metal, Vaseline may be added up to 25% of total mix.