• High Flexural & Compressive Strength

• Highly Aesthetic

• Shelf life :- 2 years
• Polymer-based restorative materials

Storage:

• Do not store above 25 C. Discharge syringes immediately after use to avoid the material curing from ambient light.  Do not use it after the expiry date.

• 4 x 4g Light Cured Universal Composite Syringe
• 1 x 2.5g Etching gel syringe
• 1 x 5ml Single step 5th generation bonding agent
• 50 x Fibred Applicator tips
• 20 x Angled tips

• Prior to preparation, clean the tooth, and remove all cleaning residues with a water spray. Determine the vita tooth shade. Use a rubber dam where possible.
• Prepare the cavity according to the general rules of adhesive technology. Round off enamel edges and protect pulp areas.
• Etch as required, according to your preferred technique, e.g. etch plus. Follow the instructions for using the materials used.
• Apply bond primer. (AQ Bond)
• Apply a lining of thin-flowing composite (compo Flow) or compomer as required. We recommend using a matrix.
• Fill the cavity in the required shade in layers of a maximum of 2 mm thickness. Light-cure each layer for 40 seconds.
• Surplus removal, contouring, and fine shaping are carried out e.g. With a diamond finisher and flexible discs of decreasing grain size. High-gloss polishing can be carried out with a
  polishing paste using polishing cups/discs.