MAXIMUM PERMISSIBLE ROTATION SPEED

• AcryPoint : 15,000 min-1
• Robot Carbide Cutter : 30,000 min-1

AcryPoint x 8 :

• 2 x Coarse grit each BP1. PC2 - For Adjusting
• 1 x Medium Grit each BP1. PC2 - For Finishing
• 1 x Fine Grit each BP1. PC2 - For Polishing

Robot Carbide Burs for smooth and fast adjustment

• 1 x 0620 robot carbide bur
• 1 x 0616 robot carbide bur
• 1 x 0635 robot carbide bur
• 1 x 0667 robot carbide bu

• Start with the coarsest abrasive instrument and work your way to the finest, using progressively finer grits until the desired shape and finish is achieved.
• Attach the abrasive instrument to a handpiece or slow-speed motor, following the manufacturer's instructions.
• Hold the appliance securely and position the abrasive instrument at the desired location.
• Apply gentle pressure and move the abrasive instrument in the desired direction until the desired shape is achieved.
• Switch to a finer abrasive instrument and repeat the process until the desired finish is achieved.
• Use water or a lubricant to cool the appliance and the abrasive instrument during use.
• Remove any remaining debris or polishing compound using a soft bristle brush or a cotton swab.
• Rinse the appliance thoroughly with water and dry.