RECOMMENDATIONS

• Finish the surface with silicone polisher before using
• Attach the delivery tip to syringe securely and tightly
• Use with Super-Snap Buff Disks - standard or mini (Shofu PN L523 or L524)
• To prevent splatter and avoid excessive heat generation always use rotary instruments at speeds below 10,000 r.p.m
• The quality of the product is not affected if liquid separation and pale color by liquid separation occurs. If the paste hardens it can be adjusted by adding water
• Store in a dark place away from direct sunlight
• Store at temperatures between 1°C and 30°C
• Replace cap tightly after use to prevent drying
• Wearing protective glasses is recommended for patient and operator.

• 1 x 3gm Syringe
• 1 x 2 tips 

STEP 1:

Remove cap from syringe and attach the delivery tip

STEP 2:

Apply a small quantity of paste to the Super-Snap Buff Disk (sold separately)

STEP 3:

A dry surface is not required. Use on a saliva moist surface is acceptable

STEP 4:

Rinse thoroughly with water to remove all paste