TECHNICAL SPECIFICATIONS:

Dura-Green Stones
- 3 each CN1, FL2 – For Adjusting

Dura-White Stones
- 3 each CN1, FL2 – For Finishing

• Begin by selecting the appropriate abrasive stone. Make sure that the stone is the right size and shape for the area that needs to be contoured or finished.
• Use a high-speed handpiece with water spray to reduce heat generation and to help control debris.
• Place the abrasive stone on the composite filling and gently apply pressure in a back-and-forth motion. Use light pressure to avoid damaging the surrounding tooth structure.
• Pay close attention to the contour of the filling and use the abrasive stone to achieve the desired shape and size.
• When working on interproximal areas, use a thin abrasive disc or strip to avoid damaging the adjacent tooth surface.
• For subgingival areas, use a curved abrasive stone and work carefully to avoid damaging the gums.
• Rinse the area frequently with water to remove debris and keep the abrasive stone clean.
• Once you have achieved the desired contour and shape, switch to a finer abrasive stone or polishing system to achieve a smooth, glossy finish.
• After polishing, evaluate the restoration to ensure it matches the adjacent teeth in terms of contour, size, and shade.
• Finally, use a finishing bur to smooth any rough edges or sharp corners that may be present.