TECHNICAL SPECIFICATIONS:

• 2 x No.1 Lab Series White Stones for adjustment
• 2 x No.2 Lab Series White Stones
• 2 x No.3 Lab Series White Stones
• 2 x No.4 Lab Series White Stones
• 2 x No.5 Lab Series White Stones
• 2 x Hardie-Black (PC2) for polishing

• Attach the kit to a high-speed handpiece.
• Identify the specific area of the alloy that needs to be adjusted or finished.
• Choose the appropriate bur from the kit based on the type of adjustment required. For example, a coarse-grit bur may be used for bulk reduction, while a fine-grit bur may be used for finishing and polishing.
• Use light pressure and slow speed when using the bur to adjust the alloy. This will help prevent damage to the alloy or the surrounding teeth and tissues.
• Use water or coolant to help reduce heat and remove debris during adjustment.
• Check the fit and contour of the restoration frequently during the adjustment process to ensure that it is properly shaped and aligned.
• Finish the adjustment with a fine-grit bur to achieve a smooth and polished surface.
• Clean the restoration thoroughly before further processing or cementation.