• Mixing ratio: 1:1 for the cartridge in the 50 ml format or 5:1 for the cartridges in the 380 ml format
• Material type: Light consistency
• Suggested techniques: two stage. 
• Viscosity: Very low
• Application: Fixed prostheses
• Properties: High dimensional stability
• Features: Opaque pigments for clarity

2 x 50 ml Cartridges (Base + Catalyst)

12 Mixing Tips

• Prepare the area and isolate as needed.
• Mix the base and catalyst in the specified ratio.
• Apply material uniformly on the impression tray.
• Seat the tray firmly and wait for the setting time.
• Remove gently and disinfect as per protocol.