COMPOSITION : 

• Powder: Fluoro Alumino Silicate Glass powder and silver-Tin Alloy spherical powder.
• Liquid: Polyacrylic And Solution.
• Store in a cool dry place.

• 1 x 10gm powder
• 1 x 4ml liquid
• 1 x Mixing pad
• 1 x Spatula

POWDER AND LIQUID DISPENSING:

• The recommended powder-to-liquid ratio is 2-level scoops of powder to 2-3 drops of liquid.
• MIXING: Dispense powder and liquid onto a pad or glass slab. Divide the powder into 2 equal parts.
• Mix the first portion with all of the liquid for 15-20 seconds.
• Incorporate the remaining portion and mix the whole thoroughly for 20 seconds.
• Note: A heavy consistency is recommended.

RESTORATIVE TECHNIQUE :

• Prepare teeth using standard techniques.
• Expensive mechanical retention is not necessary. For pulp capping, Use light cure calcium hydroxide paste as a base or liner.
• Wash and dry the prepared tooth structure but do not desiccate.
• Mix the required amount of cement.
• The working time is 1min.30 seconds at 23*C(73.4*F).
• Higher temperatures will shorten working time.
• Remove surface moisture.
• The setting time is 5 minutes 30 sec. from the start of mixing.