• Composition: Formaldehyde: 8% w/v, Glutaraldehyde: 7% w/v
• Indication: Suitable for emergency disinfection
• Surface Compatibility: Metal, glass, steel, porcelain, plastic, ceramic, rubber, etc.

• 1 x 500ml Glutapex Cleaner

Preparation:

• Ensure the area is well-ventilated before use.
• Wear gloves to avoid skin contact and protect eyes from splashes.

Surface Preparation:

• Clean surfaces to be disinfected from any visible debris or contaminants using appropriate cleaning agents if necessary.

Dilution:

• Dilute Ammdent Glutapex Cleaner according to the recommended concentration for the intended application. Refer to the product label for specific dilution instructions.

Application:

• Apply the diluted solution of Ammdent Glutapex Cleaner evenly onto the surfaces to be disinfected.
• Ensure thorough coverage of all surfaces, including crevices and hard-to-reach areas.

Contact Time:

• Allow the solution to remain in contact with the surfaces for the recommended contact time to ensure effective disinfection. Refer to the product label for specific contact time requirements.

Rinsing (Optional):

• Depending on the application and surface type, rinsing with clean water may be necessary after the disinfection process. Refer to the product label for guidance on rinsing procedures.

Safety Precautions:

• After use, dispose of any remaining solution properly according to local regulations.
• Wash hands thoroughly with soap and water after handling the product.
• Store the product in a cool, dry place away from direct sunlight and heat sources.

Post-Application:

• After disinfection, allow the treated surfaces to air dry completely before resuming regular use or contact.