• Bonding Mechanism: Moist-bonding Resin Acid-Integrating Network (R.A.I.N)
• Indicated Surfaces: Dentine, enamel, metals, ceramics, composites, fiber posts
• Application: Cementation of crowns, inlays, onlays, bridges, veneers, posts, splinting materials
• Bonding Agents Required: Not required, optional
• Etching Requirement: Not required for dentine, indicated for untreated enamel surfaces
• Film Thickness: 14 microns
• Auto-Cure Time: 7-8 minutes
• Storage Condition: Tightly sealed in original container at cool room temperature
• Shelf Life (Unopened): 3 years from date of manufacture

• 1 x 5g Syringe

Preparation:

• Ensure proper isolation and preparation of the tooth or restoration according to standard dental procedures.
• Rinse the prepared surfaces and remove excess water. Surfaces should exhibit slight moisture without pooling of water.

Automix Syringe Preparation:

• Remove the cap from the Automix syringe.
• Attach a mixing tip securely onto the syringe.

Mixing:

• To ensure an even mix of the base and catalyst components, dispense a small drop (2-3mm) of the premixed portion of the cement onto a pad and discard.
• Dispense the mixed cement directly onto the tooth or into the restoration.

Application:

• Use gentle air or cotton pellets to remove excess water from the surfaces.
• Surfaces should appear glossy; overly wet surfaces may compromise bond strength.
• Apply the cement into the prepared surface or restoration, ensuring complete coverage without voids.

Post Cementation:

• For post cementation, prepare the post hole and rinse, leaving dentine slightly moist.
• Apply Ammdent URC Dual Cure Resin Cement directly into the canal, ensuring proper seating of the post.
• Remove excess cement and light cure for 40 seconds. Auto-curing will continue for 7-8 minutes.

Inlays and Onlays:

• Rinse tooth preparation and maintain a slightly moist surface.
• Apply the cement into the preparation and seat the restoration.
• Remove excess cement with dental floss while maintaining positive pressure on the inlay or onlay.
• Apply oxygen-inhibiting gel on the margins to prevent the formation of an oxygen-inhibited layer.
• Light cure for 20-30 seconds, allowing auto-curing to complete over 7-8 minutes.

Storage:

• Store Ammdent URC Dual Cure Resin Cement tightly sealed in its original container at cool room temperature.
• Avoid exposure to direct light, extremes of temperature, contamination, and potential sources of ignition.