• Adhesive Properties: Strong with low initial pH
• Environmental Conditions: 22-24°C temperature, 50±10% humidity
• Mixing Surface: Clean, dry glass mixing slab or paper
• Mixing Tool: Non-corrosive spatula, free from dust
• Powder-to-Liquid Ratio: Cement: 1.0-1.3g powder to 0.5ml
• liquid, Base: 1.2-1.5g powder to 0.5ml liquid
• Mixing Technique: Gradual addition of powder to liquid until plastic consistency is achieved
• Mixing Time: Approximately 90 seconds
  Setting Time: Cement: 2.5 to 8 minutes, Base: 2 to 6 minutes
• Compressive Strength (after 24 hours): 70 MPa

• 1 x 30gm powder
• 1 x 15ml liquid

Preparation:

• Ensure the working environment is at a temperature of 22-24°C with a humidity level of 50±10%.
• Use a clean, dry glass mixing slab or paper as the mixing surface.
• Ensure the mixing tools, particularly the spatula, are non-corrosive and free from dust or contaminants.

Powder-to-Liquid Ratio:

• For cement applications, measure 1.0-1.3 grams of powder for every 0.5 milliliters of liquid.
• For base applications, measure 1.2-1.5 grams of powder for every 0.5 milliliters of liquid.

Mixing Technique:

• Divide the powder into portions: one portion comprising 1/6th and the other two portions each comprising 2/6th.
• Gradually add the 1/6th portion of powder into the placed liquid and mix thoroughly.
• Continue adding the remaining powder portions one by one, ensuring thorough mixing until a plastic consistency is achieved.
• The entire mixing process typically takes around 90 seconds.

Timings:

• Aim for a mixing duration of 1.5 minutes.
• The setting time ranges from 2.5 to 8 minutes for cement applications and 2 to 6 minutes for base applications.

Application:

• Apply the mixed cement or base as per the intended dental procedure, ensuring proper placement and coverage of the restoration or cavity.
• Follow standard dental practices and protocols for cementation or base placement.

Curing:

• Allow the cement or base to set according to the specified setting time.
• Monitor the restoration or treated area during the setting process to ensure proper adaptation and curing.

Post-Application Care:

• Follow up with standard post-operative care procedures as per dental practice guidelines.
• Monitor patient comfort and restoration integrity during subsequent appointments.