Colours -

• Blue - Coarse
• Green - Medium
• Yellow - Fine
• White - Superfine

Material - Plastic Resin

Tor Vm Polishing Discs Kit (81pcs) No. 1.075 : discs diameter 12 & 14mm

• 10 x Blue Polishing Discs No. 1.731(12mm)
• 10 x Green Polishing Discs No. 1.732(12mm)
• 10 x Yellow Polishing Discs No. 1.733(12mm)
• 10 x White Polishing Discs No. 1.734(12mm)
• 10 x Blue Polishing Discs No. 1.731(14mm)
• 10 x Green Polishing Discs No. 1.732(14mm)
• 10 x Yellow Polishing Discs No. 1.733(14mm)
• 10 x White Polishing Discs No. 1.734(14mm)
• 1 x Mandrel No. 1.121 (RA Type)

• Remove excess composite and contour the restoration using a fine diamond or carbide bur.
• Accurately open the package with discs to avoid squabbling and mixing of the discs and choose disc for gross reduction of necessary diameter.
• Place disc for gross reduction by gentle pushing of the connector onto preliminary sterilized mandrel until the disc is secure connected (disc must not wobble on mandrel).
• Start polishing at a speed not more than 10000 rpm. (change speed and duration when using disc of another type).
• When the polishing is finished wash away the residuals of polishing.
• Remove the gross reduction disc from mandrel by positioning a thumbnail under the disc connector and pushing the disc away from the mandrel.
• Place disc for contouring by gentle pushing of the connector onto mandrel until the disc is secure (disc must not wobble on mandrel) and repeat procedures 3 – 4 taking into account changed abrasiveness of the disc).