Polishing Discs : 

• Diameter - 14mm
• Colour - Blue, Green, Yellow, White

Polishing Strips :

• Colour - Blue & Green, Green & Yellow, Yellow & White

Tor Vm Finishing & Polishing Kit (1.021) : 1Kit contains 48Pcs Discs + 75Pcs Strips + 1Pc Mandrel

Polishing discs, 14 mm in diameter, 48 pcs. :

• 12 x Blue Discs for gross reduction (No. 1.731/14)
• 12 x Green Discs for contouring (No. 1.732/14)
• 12 x Yellow Discs for finishing (No. 1.733/14)
• 12 x White Discs for polishing (No. 1.734/14)

Finishing and Polishing strips, 75 pcs. :

• 25 x Blue & Green Strips for gross reduction (No. 1.050)
• 25 x Green & Yellow Strips for contouring (No. 1.051)
• 25 x Yellow & White Strips for polishing (No. 1.052)

Mandrel :

• 1 x Mandrel No. 1.121 (RA Type)

• Remove excess composite and contour the restoration using a fine diamond or carbide bur.
• Accurately open the package with discs to avoid squabbling and mixing of the discs and choose disc for gross reduction of necessary diameter.
• Place disc for gross reduction by gentle pushing of the connector onto preliminary sterilized mandrel until the disc is secure connected (disc must not wobble on mandrel).
• Start polishing at a speed not more than 10000 rpm. (speed and duration when using disc of another type.
• When the polishing is finished wash away the residuals of polishing.
• Remove the gross reduction disc from mandrel by positioning a thumbnail under the disc connector and pushing the disc away from the mandrel.
• Place disc for contouring by gentle pushing of the connector onto mandrel until the disc is secure (disc must not wobble on mandrel) and repeat procedures 3 – 4 taking into account changed abrasiveness of the disc.