• Store in a dry place.
• Single-dose containers must be used immediately after opening, any remaining material must be discarded.
• Use the powder within 6 months after the first opening.
• Minimum working time of 10 minutes.
• Maximum setting time of 4 hours.

• 1 x 15g Powder Bottle
• 35 x 0.20ml Liquid Pipette
• 1 x Measuring Spoon

MIXING INSTRUCTIONS: The mix must be made extemporaneously.

• Collect the powder with the spoon supplied in the box. Put a level spoonful of the powder on the mixing pad.
• Detach a mixing solution single dose container. Twist the cap to open. Pour 5 drops
  from the single dose container on the mixing pad.
• Prepare the root canal sealer by progressively adding the powder to the liquid. Mix until obtaining a smooth paste (about 60 seconds). As soon as a smooth, creamy consistency is obtained, do not incorporate any remaining powder into the liquid.
• Immediately rinse and clean the instruments to remove any residual material.
• BioRootTM RCS has a minimum working time of 10 minutes and a maximum setting time of 4 hours.

PLACEMENT INTO THE ROOT CANAL

• Perform the root canal cleaning and shaping procedure using standard endodontic
  procedures.
• Select a standardized gutta-percha master cone and check that it fits snugly at the working length.
• Dry the canal with paper points.
• Prepare BioRoot™ RCS according to the above-mentioned mixing instructions.
• Apply a coating of BioRootTM RCS onto the canal walls using either a paper point or the gutta-percha point.
• Complete the obturation by inserting the gutta-percha master cone previously coated withBioRoot™ RCS (single-cone technique) or several coated gutta-percha points (lateral condensation technique).
• Assess the quality of the root canal filling with a radiograph.
• Use a hot instrument to sever the protruding gutta-percha.
  Perform the temporary restoration using any temporary filling material.
• If a post-placement is required, it should be performed after the complete hardening of BioRoot™ RCS, i.e. between 1 week and 1 month.

A radiograph should be taken to ascertain the persistence of 3 to 5 mm of the apical root filling.

BloRoot™ RCS REMOVAL

• Since BioRootTM RCS is used in combination with gutta-percha points, it can be
  removed using conventional removal techniques.